BZPQB - KODAK FLEXICOLOR STABILIZER & REPLENISHER LF, CONCENTRATE

  • MSDS: BZPQB
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: KODAK FLEXICOLOR STABILIZER & REPLENISHER LF, CONCENTRATE
  • National Stock Number: 6750-00D004885
Product Identification

Product ID:KODAK FLEXICOLOR STABILIZER & REPLENISHER LF, CONCENTRATE
MSDS Date:12/14/1994
FSC:6750
NIIN:00D004885
Kit Part:Y
MSDS Number: BZPQB

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 800- 242-2424

Cage: 19139

Contractor
EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES
ROCHESTER, NY 14650-3129 US

Telephone: 800-828-6203

Cage: 5K871

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 55-60%


HEXAMINE

CAS: 100-97-0

RTECS: MN4725000

Fraction By Weight: 35-40%


NONIONIC SURFACTANTS

Fraction By Weight: 5-10%


DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Fraction By Weight: 1 - 5%


1,2-BENZISOTHIAZOL-3(2H)-ONE

CAS: 2634-33-5

RTECS: DE4620000

Fraction By Weight: <1%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:YES
Health Hazards Acute and Chronic:INHALATION: EXPECTED TO BE LOW HAZARD
FOR RECOMMENDED HANDLING. UNDER ACIDIC CONDITIONS, THIS PRODUCT MAY
RELEASE FORMALDEHYDE. EYES: CAUSES IRRITATION. SKIN: CAUSES
IRRITATION. MAY CAUSE ALLERGIC SKI N REACTION. INGESTION: HARMFUL
IF SWALLOWED. MAY CAUSE IRRITATION OF THE GASTROINTESTINAL TRACT.
Explanation of Carcinogenicity:CONTAINS F [50-00-0] WHICH IS
LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:EXPOSURE TO FORMALDEHYDE MAY CAUSE
RESPIRATORY SENSITIZATION IN SOME INDIVIDUALS OR AGGRAVATE
PRE-EXISTING ASTHMATIC CONDITIONS.

First Aid

First Aid:INHALATION-IF SYMPTOMATIC, REMOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. EYES-IMMEDIATELY FLUSH EYES WITH
PLENTY OF WATER FOR AT LEAST 15 MIN. GET MEDICAL ATTENTION.
SKIN-WASH SKIN W ITH SOAP & WATER. REMOVE SOILED CLOTHES/SHOES. GET
MEDCIAL ATTENTION IF SYMPTOMS OCCUR. INGESTED-DO NOT INDUCE
VOMITING. GIVE VICTIM A GLASS OF WATER. CALL A PHYSICIAN OR POISON
CONTROL CENTER.

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL
FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE TEMPERATURES MAY CAUSE
DECOMPOSITION.

Accidental Release

Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED. KEEP AWAY FROM
INCOMPATIBLE SUBSTANCES.
Other Precautions:AVOID CONTACT WITH EYES, SKIN AND CLOTHING. USE WITH
ADEUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING. THE ROUTINR
USE OF A NONALKALINE TYPE OF HAND CLEANER AND REGULAR CLEANING OF
WORKING SURFACES , WILL HELP MINIMIZE SKIN REACTIONS.

Exposure Controls

Respiratory Protection:IF FORMALDEHYDE IS EMITTED AT LEVELS REQUIRING
RESPIRATORY PROTECTION: ORGANIC VAPOR, FULL FACEPIECE WITH
ACRTRIDGES OR CANISTER OR A TYPE C AIR-SUPPLIED RESPIRATOR DEMAND
TYPE, WITH FULL FACEPIECE, H OOD OR HELMET.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:NEOPRENE RUBBER, NITRILE RUBBER.
Eye Protection:WEAR SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:EYE BATH, SAFETY SHOWER, WASHING FACILITIES.
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE PRACTICE SHOULD BVE
FOLLOWED WHICH INCLUDE PREVENTING EYE CONTACT & MINIMIZE SKIN
CONTACT/INHALE
Supplemental Safety and Health
KEEP OUT OF REACH OF CHILDREN. LOW HAZARD FOR RECOMMENDED HANDLING.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6 AIR=1
Spec Gravity:1.09
pH:9.8
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, TAN, SLIGHT ODOR.
Percent Volatiles by Volume:55-60

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:STABLE; HOWEVER, MATERIAL CAN DECOMPOSE
ABOVE 295C. AVOID TEMPERATURES ABOVE 195C.
Hazardous Decomposition Products:AMMONIA, FORMALDEHYDE. CARBON
MONOXIDE, CARBON DIOXIDE, OXIDES OF NITROGEN, OXIDES OF SULFUR.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT TO NATIONAL,
STATE, OR LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.